For Test Virtual stand on DirectIndustry.com

Products -

For Test

Leak test set
mbar

The analysis of the market and the continuous technological development allow to obtain a product that is excellent in appearance, design and electronics.
The leak detector ET99W represents the best solution on the market in terms of precision, reliability and tests execution speed.
It is particularly indicated for end production line test in automotive, mechanical, foundry, packaging, medical and wherever leak test is requested to carry out controls.
The instrument detects [...]

More specifications...

Digital Pressure calibrator
CC/min

The leaks digital calibrator takes its origins by the needs to know the leak-off rate entity on volumetric terms [cc/min] or [cc/h].
Such requirement exists especially when tests are executed on air and gas sectors parts, on which the norms express the
leakage rates in [cc/min] or [cc/h].
The instrument is combined with a micrometrical cock (supplied in the equipment) in order to simulate the desired leak. ET11 allows the seal tests instrumentation parameters programming [...]

More specifications...

Heat treatment installation

LeakID is the new For Test leak-certified series created for verifying leaks during automated tests.
Employees that use leak identification instruments need to know the calibration of those instruments at any moment, so LeakID is the key element used to verify the calibration. If the instrument recognizes the calibrated leak, it is correctly set.
LeakID is sold with the 1/8” pneumatic connector or with Staubli® male connector. For Test calibrated leak is composed by an element [...]

More specifications...

Flow Tester
nL/min

The leak detector ET97W represents the best solution on the market in terms of precision, flexibility and execution speed of seal tests with measure in flow rate.
This instrument allows to measure in a direct way the air flow generated by the leak-off rate.
ET97W is composed of a pneumatic circuit optimized in order to reduce the filling times, of a mass flow sensor, of a pressure
sensor and of an electronic pressure regulator, that guarantees stable and safe test pressures [...]

More specifications...

Leak and flow Test bench

ET07 is actually the most compact leak test instrument in the world. Although it is an instrument with very reduced dimensions, in performance terms it can be absolutely compared with the most complex and big leak test systems.
The instrument detects leaks, taking advantage of the “pressure drop” principle: at the beginning it pressurizes the piece and after an arrangement time, it finds the pressure decay.
The leds which are set on the superior part, give information about the [...]

More specifications...

Virtual stand on

For Test

Leak test setmbar

Digital Pressure calibratorCC/min

Heat treatment installation

Flow TesternL/min

Leak and flow Test bench

Leak test set
mbar

Digital Pressure calibrator
CC/min

Flow Tester
nL/min